Wi-Pod Replacement Pods

The Wi-Pod Replacement pods are designed for thick oil (CBD / THC) and are fitted with a 1.4-ohm ceramic coil.

Features:

• Refillable Thick Oil Pods
• Side-Fill Design
• Intense Flavor | Ceramic Technology
• Use Pods with Mi-Pod and Wi-Pod kits.
• Designed by Mi-One Brands (Smoking Vapor)

Filling Instructions:

• Pinch the silicone tab and pull gently to remove the tab from the fill port. It will stay connected to the pod.
• Heat a pre-filled syringe of distillate oil. (Oil & syringe not included. If the oil syringe is glass, it can be heated with a hairdryer, heat gun, torch or lighter.  If plastic, follow the recommendations of the store where you purchased the oil.)  Heat the liquid until it is thin and runny in the syringe-like water until the contents move freely. Be careful to not overheat/burn your oil.
• Tilt the Wi-pod pod so that the fill port is up on top. Carefully insert the syringe tip into the fill port.
• Gently plunge the syringe to fill the Wi-Pod pod with up to 1.0mL of oil.
• Remove the syringe from the Wi-Pod.
• Close silicone tab on the pod. Make sure the tab is completely closed and flush, but be careful not to push the silicone tab into the pod.
• Let pod sit upright for 5 minutes so that the ceramic coil can wick the oil. The oil will thicken, cool and return back to its original viscosity.
• Line up the pins and insert the pod into your Wi-Pod
• For the first time after filling, take 5-7 very small gentle puffs to prime the coil until vapour becomes visible to ensure you do not burn the coil.

Notes:

• Keep away from direct sunlight, high temperatures or moist and excessively cold environment.
• Remove the pod before charging your device.
• Do not overfill the pod.
• Please dispose of pods properly.